Vineyard post row 2.5m magnelis

The standard row post forms the basis of the vineyard structure. The distance between row posts varies depending on the terrain and the habits of the winegrower up to a maximum of 6 m, the distance between individual rows takes into account the technology that will be deployed in the vineyard, and is usually in the range of 1.6 - 2.4 meters.
There are 4 holes Ø 8 mm in the post. S-hooks, which are 10 cm apart, are used to secure the guide wire between the posts. Standard in-line
the post contains 2 x 11 pcs of hooks. Material: DX51D Mag 175 and above (Zn+Al+Mg)

The row post is used in the individual rows of the vineyard, outside the beginning and end of each row (the end post is used here). Agropodnik's row post is rolled from steel sheet thickness. 1.5 mm, with Magnelis surface treatment . MAGNELIS – a revolutionary material of modern times. Magnelis is applied in classic hot-dip galvanizing plants. The zinc bath contains 93.5% zinc, 3.5% aluminum and 3% magnesium. Magnesium is key in the mixture, as it forms a stable and durable layer over the entire surface of the base metal, which provides effective protection against corrosion. Magnelis® provides protection in the form of a thin film based on zinc and magnesium to the exposed cut edges of the sheet metal, thus preventing the corrosion reaction. This means that even during additional treatment of the rolled profile (such as pressing holes and hooks on the columns), the subsequent exposed edges are covered with a protective layer thanks to the self-regeneration of Magnelis.

Row posts are pushed into the soil approx. 70 cm deep. The distance between individual posts during installation should not exceed 6 m. In a location with strong or frequent wind, the distance between posts is a maximum of 4.5 meters . The standard dimensions of a row post are: height x width x depth - 2500 x 50 x 30 mm. The weight of the column is 3.1 kg

Alternatively , concrete posts can also be used to build a vineyard track.