Price A (over 0 ks): 20,14 € without VAT (=24,37 € with VAT)

Price B (over 9 ks): 19,36 € without VAT (=23,43 € with VAT)

Price C (over 19 ks): 18,89 € without VAT (=22,86 € with VAT)

Price D (over 49 ks): 18,59 € without VAT (=22,49 € with VAT)

always in stock

Online calculator for immediate fence calculation

Catalog number: 31100

Solid and high-quality 3D panel with a height of 103 cm and a width of 250 cm . We deliver it in the form of thick hot-dip zinc .

The panel is made of 4.8mm (horizontal wires) and 4.0mm (vertical wires). The mesh of the panels is 50 x 200 mm. The upper and lower parts are 3D shaped to increase the stiffness and strength of the panel. The vertical wires are stretched by 2.5 cm at the top and bottom, thus forming a barrier for spikes against climbing over.

Despite the wide range of plastic-coated panels , the hot-dip galvanized treatment is very popular and in demand. The gray appearance of hot zinc underlines the architectural intentions of designers and investors for an industrial and modern appearance of fencing in family houses, industrial buildings, public spaces, playgrounds, and in either 3D panels or 2D panels . The quality of hot-dip galvanizing is guaranteed by the proven technological procedure of dipping the entire weldment of the panel into a bath with molten zinc with a purity of 98%. Panels produced and galvanized in this way have been serving our clients for decades without any change in appearance or defects in the surface finish. The purpose of choosing a panel fence is the requirement for increased strength of the fence, so do not settle for panels on the market made of wire with a diameter of only 4.0 mm and only galvanically galvanized and require thick-layer hot-dip galvanizing!

If you require this panel in color , you can order a Lario green panel or LarioEco or Lario ANTRACIT or a 3D panel of any color or a 2D panel of any color . . There are no limits to the realization of your fence so that the color of the fence is coordinated with your architectural plan.

The application of the panels itself is simple and anyone can really handle the assembly. Assembly consists of screwing the panels between (or onto) concreted posts. The panels are most often attached to:
** square posts 60x40mm using metal sleeves. This is the most common option and the option we recommend . Fastening to the post is done using 2-3 pieces of continuous metal sleeves 60x40mm . We also offer corner and end sleeves . The advantage of using a combination of panel and post 60x40mm and sleeves is that the length module of the assembly corresponds exactly to the 250cm/height 20cm and 250cm/height 30cm under-gravel boards, so you don't have to shorten them.
** square posts 60x60mm . Fastening is done using the Zn panel mount , when the panel is "on the side" of the post, or with plastic mounts , when the panel is not between the posts, but is placed in front of the post. In the case of using this system, it is necessary to shorten the 250 cm long sub-slabs by 5 cm to the required module.
You can find detailed assembly instructions with the spacing of the columns during concreting and the technological procedure in the DOCUMENTS section

We do not keep garden gates and gates in hot-dip zinc or any color in stock, but we will custom-make any size that you can configure in our online calculator for gates and garden gates. We also recommend a suitable version with a gray plastic coating for the galvanized fence.

You can configure all types of fences in 2 clicks and immediately calculate the price of the entire fence in our online calculator

Recommended accessories

 
 
 

Consent to cookies

For the best possible experience of using our website, we need your consent to the processing of cookies. These are small files that are temporarily stored in your browser. Thank you for giving it to us and helping us to further improve the site.