Price A (over 0 ks): 37,48 € without VAT (=45,35 € with VAT)
Price B (over 9 ks): 36,30 € without VAT (=43,92 € with VAT)
Price C (over 19 ks): 35,72 € without VAT (=43,22 € with VAT)
Price D (over 49 ks): 33,96 € without VAT (=41,09 € with VAT)
Online calculator for immediate fence calculation
Catalog number: 31113
Solid and high-quality 3D panel with a height of 183 cm and a width of 250 cm . The panel is galvanized and after ordering the colored version, we will plaster this panel in the shade of color you need according to the RAL scale. Enter the RAL shade in the notes in the order.
The panel is made of 4.8mm (horizontal wires) and 4.0mm (vertical wires). The mesh of the panels is 50 x 200 mm. The upper and lower parts are 3D shaped to increase the stiffness and strength of the panel. The vertical wires are stretched by 2.5 cm at the top and bottom, thus forming a barrier for spikes against climbing over.
Despite the wide range of plastic-coated panels , hot-dip galvanized treatment and subsequent plasticization with a layer of polyester surface treatment is very popular and in demand. The galvanized and plastic-coated panels produced in this way have been serving our clients for decades without any change in appearance or defects in the surface finish.
We deliver this panel coated with plastic in the color version of the RAL scale in the color of your choice . There are no limits to the realization of your fence so that the color of the fence is coordinated with your architectural plan. The minimum number of pieces for plastic coating due to the difficulty of rearranging the plasticizing line is at least 20 pieces. The delivery time of colored plastic panels is 14-20 days. In the same color, we can supply square posts 60x40mm or 60x60mm or colored round posts dia. 48mm.
We will make gates and gates in RAL colors in any size that you can configure in our online gates and gates calculator. Here you can configure and immediately calculate the price of the entire fence in 2 clicks.
We can deliver this product to you free of charge or you can pick it up in person immediately in Vamberk , Tymákov near Pilsen or Vsetín .
Recommended accessories
Column 60x40mm 250cm colored
Very strong square post 250 cm long and 60x40mm profile . The column is high-quality galvanized according to the DX51D + Z275 standard, and then we can custom -plaster it to any shade. The...
price 24,70 €
without VAT for ks
(=29,89 € with VAT)
to be delivered within 10 days
Square column 250 cm 60x60 mm colored
The post with a height of 250 cm is made of galvanized jackl profile 60x60 with extremely high-quality zinc treatment according to the DX51D + Z275 standard and subsequently plasticized with a...
price 21,95 €
without VAT for ks
(=26,56 € with VAT)
to be delivered within 10 days
Continuous sleeve 60 x 40 mm colored
Continuous sleeve 60x40mm in the same shade of color as the post. Attention!! we will provide you with these clamps only as part of the coloring of the posts!!!! . It is intended for...
price 1,60 €
without VAT for ks
(=1,94 € with VAT)
to be delivered within 10 days
End sleeve 60 x 40mm colored
End sleeve 60x40mm in the same shade of color as the post. Attention!! we will provide you with these clamps only as part of the coloring of the posts!!!! . it is intended for one-sided...
price 1,60 €
without VAT for ks
(=1,94 € with VAT)
to be delivered within 10 days
Corner sleeve 60 x 40mm colored
Corner sleeve 60x40mm in the same shade of color as the post. Attention!! we will provide you with these clamps only as part of the coloring of the posts!!!! . is intended for attaching...
price 1,60 €
without VAT for ks
(=1,94 € with VAT)
to be delivered within 10 days
Handle for mounting the panel in concrete. stainless steel pillars
NEW !!! The fastening element for mounting panels on a concrete pillar (e.g. split concrete, stone column, facing bricks, masonry column, house wall, etc.) is made of stainless steel. The...
price 2,41 €
without VAT for ks
(=2,92 € with VAT)
always in stock
Slab length 2.5 m, height 30 cm RODEPA
A concrete screed slab is the only functional option (in contrast to plastic slab substitutes, etc.) to prevent grass from growing through the fence, to strengthen and reinforce the entire fence,...
price 19,19 €
without VAT for ks
(=23,22 € with VAT)
always in stock
You can order the product with special transport in detail.
Clip for panels - stainless steel
Universal clip for installing panels on a post. The through profile of the handle is suitable for fixing the panel when implementing panel fencing in the style of endless assembly of panels, when...
price 0,34 €
without VAT for ks
(=0,41 € with VAT)
always in stock
panel connector for endless assembly - stainless steel
Panel connector for endless panel assembly. It is used when it is necessary to adjust and connect the panels outside the post. For installation, it is necessary to use pliers for connecting...
price 0,27 €
without VAT for ks
(=0,33 € with VAT)
always in stock
Panel handle - Zn
Grip designed especially for attaching the vertical wire of any 3D fence panel or 2D fence panel . The handle is fully zinc-plated!!! . The biggest advantage of the attachment is its...
price 0,68 €
without VAT for ks
(=0,82 € with VAT)
always in stock
Hard stainless steel handle
The hard handle is a universal fixed element for attaching all types of panels made of wires with a diameter of 4-6 mm and galvanized or plastic-coated wires . Ideal for additional installation...
price 0,43 €
without VAT for ks
(=0,52 € with VAT)
always in stock
Panel screw coupling Zn
The panel screw coupling is an ideal accessory for connecting and adjusting fence panels of all wire diameters. Use for 3D and 2D panels . The joint consists of 2 opposite sheets, between...
price 0,64 €
without VAT for ks
(=0,77 € with VAT)
always in stock