Strut TURBOLINEA 200 cm / dia. 38 mm plastic coated

Strut 200 cm long, made of steel tube dia. 38 mm and wall thickness 1.5 mm. Color fir green (RAL 6005). Hot-dip galvanized (outside and inside) and plastic coated - ensures long life and quality resistance. In the structure of the fence, the strut is a very important element and it is necessary to use one at the beginning of the fence, 2 pieces (continuous to the common post) for every approx. 30 m of the length of the fence, 2 pieces for each corner (in the direction of the fence line) and one at the end of the fence. Also, don't forget to brace every gate and gate from both sides.

Made in France.

We recommend using 38, 48 mm sleeves for mounting the post brace on plastic-coated TURBOLINEA posts, and 60 mm sleeves for gate posts. Sleeves are not part of the product and must be ordered separately.

SPECIAL DISCOUNT 5% !!!! (the discount is already included in the listed prices)
Strut made of steel pipe dia. 38 mm and wall thickness 1.5 mm . Length 200cm. Color fir green (RAL 6005). Hot-dip galvanized (outside and inside) and plastic coated (polyesterre). Made in France. For mounting on plastic. TURBOLINEA posts (using a 38, 48 mm sleeve) and for gate posts (using a 60 mm sleeve) The sleeve is not part of the product and must be ordered separately.

Struts are used for each corner (2 pcs), end and beginning of the fence (1 piece each) and for sections longer than 30m (as continuous struts - 2 pcs)
Expected lifetime approx. 20 - 25 years.
The innovative all-metal design of the strut guarantees, compared to the version with a plastic cap, the possibility of tensile and compressive loads and significantly increases the strength and service life of the strut

The plasticizing of the struts itself is carried out at the highest technological level with a layer of melted polyester plastic . To ensure quality, the struts supplied by us are plasticized in France on one of the most modern lines in Europe . The range and quality of individual operations during surface treatment - hot-dip galvanizing, chemical degreasing, pre-surface treatment by dipping in zinc salts with subsequent neutralization of the surface of the posts, phosphating, plasticizing with polyester itself with subsequent polymerization, drying and output automatic quality control of each brace cannot be compared to the production of posts in ordinary paint powder boxes, where most competing struts are manufactured. The extremely thick layer of hot zinc and polyester resistant to frost, thermal expansion of the metal and UV radiation guarantees unsurpassed quality and has been tested for years by deployment in the demanding conditions of coastal states as well as the harsh frosty conditions of Scandinavia.