Gate Exklusiv height 125 cm x 360 cm

Exclusive version of the 2-wing openable gate with a height of 125 cm and a passage width of approx. 330 cm. Plastic-coated gate with handle closing and lockable with a box key . Please note that gates of this type are produced according to the type of modification and the ordered version in the width of the wings, which may be slightly different from the stated dimension of 330 cm and thus the exact width of the passage (i.e. also the total width of the gate including posts) may change. If you work in your project with the exact width of the wings, we will provide you with information about the exact size of the wings by phone at 494 544123.

If you choose any modification (the gate will be made to order with a delivery time of approx. 10 days), we can reduce the height of the gate. E.g. for use on a LARIO 142 cm fence, we will reduce the height from 150 cm to 140 so that the height of the gate corresponds to the height of the fence. When determining the height of the gate, don't forget to take into account any under-gravel plate (or the part of it that is above the ground). For 3D panels, we recommend the 3D mesh modification for 2D fences, the 2D mesh modification . Write the request to lower the gate in the note of the order

The gate is made of galvanized square steel profiles, which after welding the frame and welding the inner mesh, are plasticized to the shade RAL 6005 - fir green (coated with melted polyester plastic). The massive profile of the gate and the solid filling made of strong wire determine the gate for the construction of fences in combination with LARIO, LARIOEco panels, 2D panels, Executive plus, Strong , Top 70 , Top 100 . Thanks to its robustness and high level of ability to resist vandalism, it is also suitable for urban furniture, playgrounds, parks, etc. The width of the passage is ideal for the normal use of cars and trucks. Czech product.

* Gate wings - 2 frames of height 125cm and width 164cm are welded and subsequently plasticized from a square profile 30x30mm with a welded mesh 46x46mm made of 3.0mm wire

* Garden gate posts (hinged and stop) are made of square thick-walled profile 80x80mm and are 60cm longer than the height of the gate to be concreted, supplied including top caps

* Gate accessories: upper and lower adjustable hinges for each gate hinge post, with which you can easily set and align the exact location of the gate wings, all fittings, stop mechanism and connecting material - all in a maintenance-free design , handle, dozic lock + 3 keys .

The left wing of the gate when viewed from the street is secured against unintentional opening by a plug (with a "clamp", a locking pin), which cannot be opened when the gate is closed and locked, so the gate cannot be opened without unlocking it. The right wing locks into this left wing and closes. A handle and a locking mechanism are located in the right wing . With a simple setting, it is possible to choose whether the right gate leaf opens towards each other or away from each other . After unlocking and opening the right wing, the plug can be lifted at the left wing and the left wing can then be opened freely to the street or to the property. The opening angle of the gate wings is approx. 130°.

For panel fencing, the gate does not resist at all, and the panels can be attached to the gate posts using panel mounts.

For Executive plus, Strong , Top 70 , Top 100 bundled nets, we recommend placing a brace on the right and left of the garden gate post, e.g. using braces and braces. The edge of the painted meshes Executive plus, Strong, Top70, Top100, etc... can be attached to the gate posts with plastic holders . The edge of the Lario, Lario Eco, 3D, 2D panel can be attached to the gate post with stainless steel clamps or plastic clamps ( black / green ). According to custom, a classic Turbolinea post can also be concreted to the gate post, which can be used to attach the edge of the mesh or panel (with the Lario clamp).

You can order other colors than fir green (e.g. another color, anthracite, Zn) in the modification menu.

Apart from this offer, you can configure any size or design of the gate yourself and find out the production price immediately in our online calculator . The production time of atypical gates usually takes 10-14 days, depending on the complexity of the design. In the atype section. products, we bring you a photo gallery of custom-made gates, gates and sliding gates.