Garden gate 150 x 100 basic

The height of the gate is 150 cm, the width of the wing is 93 cm + hinges, the passage is approx. 95 cm.

The production of the fence gate is ensured from a tubular frame with welded- in solid welded mesh with 45x45 mm mesh and from 3 mm wire . Everything is galvanized and then coated with plastic (polyurethane finish - fir green RAL 6005).

This is a very popular, inexpensive variant of the garden fence single-wing gate. The gate in the given size will ideally ensure the entry of people and smaller garden equipment onto your property. You can also use it to provide access to the garden, orchard or paddock, to the chickens, etc... .

The garden gate is delivered without posts, as it is supposed to be installed on an already concreted post (diameter 38 - 60 mm). The connection to the column is solved via adjustable hinges. The closing is in the form of a "clap" on the post ( we recommend the Turbolina 200/48 PVC post ). This gate is ideal for additional installation in an already finished fence, when we hang it on the existing post.

The delivery includes a wing of the garden gate, 2 pcs of adjustable hinges, a closing flap. Locking can be solved by purchasing 2 pcs of eyelets, which we screw onto the garden gate. The gate can be locked with a padlock.

We can deliver this product to you for free , or you can pick it up in person immediately in Vamberk , Tymákov or Vsetín .

The garden gate can be very easily mounted on a 48mm Turbolinea post or additionally inserted into an already finished fence. Follow the given steps.

Installing the garden gate on the existing post is very simple. At the height of the adjustable hinges, drill a post through a hole with a diameter of 12 cm. You insert the hinge into the drilled holes (top and bottom), secure it on both sides with a nut and slide the gate into the hinge. We recommend bracing this hinge post, as it will be stressed in the direction of the mesh. At a distance of 105 cm from the hinge post, we concrete (or anchor it with an earth screw) a stop post - preferably Turbolinea pr. 48mm. We close the latch - the "clap" of the garden gate. We also recommend bracing this stop post, as it will be stressed in the direction of the mesh