Fence post 1.6m hot-dip galvanized

The profiled fence post, 160 cm long , is a great choice for light and simple fencing in combination with, for example, knotted forest or sheep mesh. It is either hammered into the ground or pressed in, which eliminates the cost of concreting. The recommended spacing is 2.5-3 m, depending on the requirements for strength and stability . S-hooks are used to secure the guide wire between the posts. The standard row post contains 11 hooks. Material: Hot-dip galvanized with a zinc layer of 275 g per m2.

Metal posts with hooks are designed for fencing orchards, forest nurseries and game reserves, roads, highways, and wherever it is necessary to ensure economically advantageous fencing of any land. Suitable mesh for these posts is, for example, forestry or sheep mesh. Posts with dimensions of 50x30x1600 mm are made of 1.5 mm thick steel sheet, with surface treatment. Painting or other surface treatment is not necessary. They are installed in the ground without concreting, simply by pressing!

Standard row posts They form the basis of the fence structure. They are installed at a distance of approximately 2.5 - 3 m from each other, in a vertical position. The mesh is attached to the posts using hooks, which are
10 cm apart. Fence posts are made of DX51D steel sheet. Material: Hot-dip galvanized with a zinc layer of 275g per m2.

The height of the row post is 1600 mm and it has 11 holders.

Our tip!!! This post is also suitable for installing a plastic holder on galvanized shepherd wire (we recommend a diameter of 1.4mm, 1.8mm or 2.2mm). as a high-quality, solid fence shepherd post . The picture gallery shows a diagram of the appropriate layout of the holders depending on the type of use.

The post is rolled from 1.5 mm thick steel sheet, with a Magnelis surface treatment. MAGNELIS – a revolutionary material of modern times. Magnelis is applied in classic hot-dip galvanizing plants. The zinc bath contains 93.5% zinc, 3.5% aluminum and 3% magnesium. Magnesium is key in the mixture, as it creates a stable and durable layer on the entire surface of the underlying metal, which provides effective protection against corrosion. Magnelis® provides exposed cut edges of the sheet with protection in the form of a thin film based on zinc and magnesium, thus preventing the occurrence of a corrosion reaction. This means that even during additional treatment of the rolled profile (such as pressing holes and hooks on the posts), the subsequent exposed edges are coated with a protective layer thanks to the self-regeneration of Magnelis. Row posts are pressed into the ground approximately 70 cm deep. The standard dimensions of a row post are: height x width x depth - 1600 x 50 x 30 mm . The weight of the post is 1.98 kg.

Bracing is done by pushing or hammering the post in at an angle and then screwing it to the row post.